Installation Method Of Stone Cutting Machine

1. First place two tracks parallel to the ground. Its width is equal to that of the cutting frame traveling wheels.
2. Put the rack on the parallel track, and move back and forth completely in line with the track and move freely.
3. Put the stone cutter host on the frame, the four rollers on the host must completely match the channel steel on the frame, and the movement direction of the host and the movement direction of the frame after being placed are 90 degrees intersecting with each other. Freedom of movement.
4. Install the power so that the motor is firmly connected to the host through the motor tripod, and the direction of the axis of the motor is horizontally and vertically intersected with the direction of the host.
5. Install the belt
6. Install the shield.
7. Start the motor, and check that the rotation direction of the saw blade shaft is consistent with the direction indicated by the arrow on the guard.
8. Install the saw blade. Connect the water pipe.