About Machine Placement
1: The installation area of 5 Axis Bridge Saw requires the ground to be a concrete cement foundation, and the height deviation needs to be within plus or minus 5mm, if the ground quality is poor, the concrete foundation needs to be re-done, and the foundation drawing is also shown in the attached drawings.
2: The right side of the machine should be placed ≧ 1000mm away from the wall (as shown in Figure 1), and the back of the machine should be ≧ 500mm away from the wall (as shown in Figure 2).
Figure 1
Figure II
3: The cushion block needs to be used to pad the height of 5CM between the foot of the machine and the ground, so that the workbench can be lifted and kept a safe distance from the ground. The height of the bottom of the workbench from the ground needs to be ≧450mm (as shown in Figure 3).
Figure III
