Analysis of precautions for using stone cutting machines

CNC systems and rock cutting machines are a field where users can use various graphic input methods provided by the system to establish and compile partial graphics and flexibly achieve discharge.
Before the delivery of the equipment, the workbench label holder and two grinding wheels should be carefully adjusted to ensure the perpendicularity and parallelism of the grinding specimen. Two parallel surfaces should be worn each time, and a specimen of 6 cubic meters can only be worn three times through this equipment.
In order to avoid damaging the grinding wheel and equipment, manual feed is not allowed for automatic grinding at any time. It should be noted whether there is sufficient coolant flow during the grinding process. If there is too little, it will accelerate the wear of the diamond grinding wheel.
1. CNC system: CNC system is an important component of rock cutting machines, and users can use various graphic input methods provided by the system to flexibly establish and compile part graphics and achieve layout.
2. Air circuit system: This system includes various gas supply pipelines, valves, pressure reducers, pressure gauges, and electromagnetic valves. It is an automated cutting technology developed on the basis of precision and rapid cutting technology.
3. Programming system: It is mainly a computer-aided system for part programming and nesting developed for CNC cutting machines.
4. Mechanical operation system: The mechanical operation system is composed of crossbeam, sliding seat, deceleration mechanism, lifting mechanism, etc. It has strong anti-interference ability, especially at low speeds, and its advantages are even more prominent, which can transform cutting from mechanical cutting to a process method of mechanical processing.