Precautions for maintenance of stone cutting machinery

1. Pay attention to checking equipment components
Operators should regularly check the stone cutting machinery, such as whether there is blockage in the glaze transition mesh, the temperature and oil volume of the oil tank, the condition of the diaphragm pump and nozzle, etc. In addition, it is strictly prohibited to flush the electric control box and hydraulic station of the stone cutting machine with water, and attention should be paid to observing the lubrication status of the machine's horizontal and vertical guide rails and the surface of the gear rack.
2. Pay attention to the wear and tear of the equipment
Stone cutting machinery requires daily maintenance of the surface of components and prevention of damage. Except for this, operators should regularly check the cutting head for signs of wear and damage, such as accidental contact with the fixture by the mixing tube that may cause damage. Moreover, operators should regularly inspect and replace the consumable components of the sand conveying system, such as pipelines and joints.
3. Pay attention to daily cleaning
Operators should pay attention to cleaning the dirt on the stone cutting machinery and guide rails to ensure daily operation of the bed. In addition, operators should pay attention to checking the cleanliness of the hydraulic station motor and oil tank surface, checking the internal system and keeping it in a better operating state, in order to make the stone cutting machinery operation more efficient.
Not only in this way, operators can often observe the condition of stone cutting machinery and check the dust prevention devices in various places during operation. If damage or loose connections are found, timely treatment should be taken to prevent external sand and dust from entering and damaging the equipment.